Decking Sheets (50/230)

Trapezoidal Metal Profile sheets with strong and reliable shear bond performance which is augmented by cross embossing located in the profile. The composite floor profile offers the ultimate in the light weight steel decking which reduced concrete usage to provide a cost effective and alternative floor solution that easy to install.

Application
 
Technical Specification
  • High tensile structural grade steel
  • Coating Mass 120, 180 & 275 GSM
  • Coating Standard IS : 277
  • Yield Strength 240 MPA
Thickness
Available Finish
Advantages
 
Load Tables

The structural adequacy of DECK sections is established by choosing the section to provide requisite sectional modules to satisfy moment and deflection criterion. A moment coefficient of 1/8 is used for single and dual spans and 1/10 for 3 or more spans. The deflection co-efficient are 0.013 for single span and 0.0078 for multi spans. The maximum deflection of the DECKSHEETS is restricted to L/250 under uniformly distributed loads.

Maximum Spam(m) Single Span

Section Properties

Load Tables

Benefits Of Metal Decking
 

Decking Sheets

Decking Sheets

Steel Decking Sheets

Composite Decking Sheet

In our Composite Decking Sheet the floor is constituted by a profiled Deck sheet made of metal onto which a layer of concrete is poured. The GI decking sheet is attached to the concrete by method for mouldings on the sheet which prevent the cement from slipping on a level plane and disconnecting vertically. At the point when the concrete is spilled and until it has arrived at a proper level of solidifying, the weights of the concrete, staff working and supplies utilized as a part of borne by the sheet alone. When the cement has solidified the sheet and the concrete structure a bound together bond.

Non-Composite Decking Sheet

Permanent Formwork Profile Range

We manufacture profiles which are used as permanent formwork. Permanent formwork remains it situ for the life of the building but, unlike composite flooring profiles, it does not Act as reinforcement in the concrete slab.

  •  The steel decking supports the wet concrete and construction loads.
  •  Temporary propping can be eliminated.
  • The concrete slab requires full structural bar or mesh reinforcement.

TECHNICAL SPECIFICATION
Base Metal High Tensile Structural Grade Steel 240 / 345mpa / 550
Coating Mass 120,180,& 275 GSM/td>
Thickness 0.8 mm to 2mm
Coating Standard Galvanised Steel as per IS : 277
Type Bare, Primer Coated, Galvanised, Pre Painted
Length Upto 12000 mm

75/305mm DATA SHEET

305/915 profile steel panel / 250Mpa (75mm rib)
Panel Thickness mm Weight kg/m2 Area cm2 Ix cm4 ZX-Top cm3 ZX-Bottom cm3 Ma Kn.m
mm mm kg.m2 cm2 mm cm4
0.80 8.57 9.76 100.90 26.91 26.91 5.570
1.00 10.71 12.19 126.10 33.63 33.63 6.961
1.20 12.84 15.25 157.70 42.05 42.05 8.705
fy= 34.5 Kn/cm2
E= 2.00E+08 KN/M2
Slab depth(mm) Volume of concrete (m3/m2) weight of concrete
Wet(kN/m2) Dry(kN/m2)
100 0.063 1.51 1.48
150 0.113 2.71 2.66
200 0.163 3.91 3.83
250 0.213 5.11 5.01
75 Load span Tables
Maximum span (double span) (in meters)
Panel Thickness Profile Weight Sectional Area Concrete slab depth above profile
mm kg/m2 cm2 100mm 150mm 200mm 250mm
0.80 7.66 9.76 3.60 3.00 2.70 2.400
1.00 9.57 12.19 3.90 3.30 3.00 2.700
1.20 11.97 15.25 4.30 3.70 3.30 3.000
Allowable load in (KN/m2)
Thickness Span In Meters
1 1.25 1.5 1.75 2 2.25 2.5 3
0.8 43.6 27.6 19.6 13.6 10.6 8.6 6.6 4.8
1 55.6 35.6 24.6 17.6 13.6 10.6 8.6 6.1
1.2 69.6 43.6 30.6 22.6 16.6 13.6 10.6 7.7

50/230mm

230/915 profile steel panel / 250Mpa (50mm rib)
Panel Thickness mm Weight kg/m2 Area cm2 Ix& cm4 ZX-Top cm3 ZX-Bottom cm3 Ma Kn.m
mm mm kg.m2 cm2 mm cm4
0.80 8.14 7.57 38.79 12.68 19.01 2.624
1.00 10.17 9.46 48.49 15.79 23.89 3.270
1.20 12.20 11.35 58.19 18.89 28.81 3.911
fy= 34.5 Kn/cm2
E= 2.00E+08 KN/M2
Slab depth(mm) Volume of concrete (m3/m2) weight of concrete
Wet(kN/m2) Dry(kN/m2)
100 0.0758 1.82 1.78
150 0.1258 3.02 2.96
200 0.1758 4.22 4.13
250 0.2258 5.42 5.31
50 Load span Tables
Maximum span (double span) (in meters)
Panel Thickness Profile Weight Sectional Area Concrete slab depth above profile
mm kg/m2 cm2 100mm 150mm 200mm 250mm
0.80 5.94 7.57 2.60 2.10 1.90 1.700
1.00 7.43 9.46 2.90 2.40 2.10 1.900
1.20 8.91 11.35 3.10 2.60 2.30 2.100
Allowable load in (KN/m2)
Thickness Span In Meters
1 1.25 1.5 1.75 2 2.25 2.5 3
0.8 20.6 13.1 9.1 6.6 5.1 4.1 3.1 2.25
1 26.1 16.6 11.6 8.1 6.1 5.1 4.1 2.6
1.2 31.1 19.6 13.6 10.1 7.6 6.1 4.6 3.1

TR60+Load Span Tables (Normal Weight Concrete)-Steel Grade S350

Maximum spans(m) using normal weight concrete (wet density 2000 kg/m3) for S350 grade steel

Design Table Limits – Criteria

Typically spans are governed by the maximum “un-propped” condition at construction stage, except where values are for propped spans and are indicated as follows: Spans shown in red indicate where spans are limited by the fire condition, greater spans may be achievable by either increasing mesh size or addition of bottom reinforcement. Spans shown in the blue indicate where spans are limited by the composite/normal stage conditions, greater spans may be achievable where share studs are provided.